Panasonic HD Link2Cell KX-TG885SK Operating Instructions Manual page 20

Link to Cell
Cellular line only mode (If you do
not use the landline)
If you do not use the landline, we recommend
setting the unit to the cellular line only mode.
The default setting is "Off".
Important:
R If you turn on the "Cell line only
mode", disconnect the telephone line cord
from the base unit. Otherwise the "Cell
line only mode" cannot be activated.
Handset
1
MMENUN#157
2
To turn on:
MbN: "On" a MSELECTN a MbN: "Yes"
a MSELECTN
To turn off:
MbN: "Off" a MSELECTN
Note:
R Once you set this mode, you can use the
following buttons to make cellular calls:
– for the handset, press M
instead of MCELLN (page 22).
– for the base unit, press MZN without
pressing MCELL 1N or MCELL 2N set for
the cellular line selection (page 20,
28).
R Once you set this mode, the following
features cannot be used:
– Landline features (Incoming ringer
volume, incoming ringer tone, dial mode,
flash time, and line mode)
– Answering system (page 69)
Messages cannot be received.
– Voicemail features (page 76)
R After this mode is turned on or off, the base
unit reboots.
– Bluetooth connections from cellular
phones or Bluetooth headset are
disconnected. If the auto connection is
turned on (page 19), the cellular phones
are reconnected.
– will be displayed on the handset
momentarily. The handset can be used
once is displayed.
For assistance, please visit http://shop.panasonic.com/support
20
When you use the landline again
Before connecting the telephone line to the
base unit, select "Off" in step 2, "Cellular line
only mode (If you do not use the landline)",
page 20.
Cellular line selection
This feature determines which cellular line is
selected to make cellular calls when:
– you press MCELLN on the handset.
– you press M
– you press MZN on the base unit while the
The following settings are available:
– "Manual" (handset only: default): You can
– "Cellphone 1"
– "Cellphone 2"
N or MZN
Handset / Base unit
1
2
3
*1
Storing your area code (for
dialing only a 7-digit phone
number to make a local call)
You need to add your area code when making
cellular calls to a phone number in your area.
Once you store your area code, it is
automatically added to the beginning of the
7-digit phone number when making cellular
calls.
Handset
1
N or MZN on the handset
while the cellular line only mode is turned
on.
cellular line only mode is turned on.
select the desired cellular line when making
a call.
*1
CELL 1 is selected.
*1
: CELL 2 is selected.
MMENUN#634
MbN: Select the desired setting. a
MSAVEN
Proceed with the operation for your unit.
Handset: MOFFN
Base unit: MEXITN
After the Bluetooth device is paired, the
device name is displayed.
MMENUN#633
(base unit default):