1 Preface You have chosen a new, innovative technology for measuring oxygen. The OXY-1 ST (Trace) is a compact fiber optic oxygen meter. It is based on a novel technology, which creates very stable, internally referenced measured values. This allows a more flexible use of oxygen sensors in various fields of interest.
PreSens is explicitly not liable for direct or indirect losses caused by the application of these measurement systems. In particular it has to be considered that malfunctions can occur due to the naturally limited lifetime of the sensor depending on the respective application.
For further information on sensor handling and calibration please refer to the respective sensor instruction manual (www.presens.de/manuals). Connect the USB cable to the connector on the OXY-1 ST and to an USB port of your PC / notebook. Fig. 2 Connecting the USB cable If required, you can now connect a Pt100 temperature sensor to the device.
Page 10
Now start the PreSens Measurement Studio (PMS2) software on your PC / notebook. (The OXY-1 ST always has to be connected via USB before the software is started.) After successful initialization the software main screen is displayed and the OXY-1 ST will show...
4 Technical Data OPTICAL SENSOR OXY-1 ST: PSt7 Oxygen sensor OXY-1 ST Trace: PSt7, PSt8 Optical connector 1; up to 10 OXY-1 ST (Trace) can be controlled Channels simultaneously via PMS2 software LED peak wavelength 633 nm TEMPERATURE SENSOR 0 – 50 °C...
6 Concluding Remarks Dear Customer, With this manual, we hope to provide you with an introduction to work with the OXY-1 ST fiber optic oxygen meter. This manual does not claim to be complete. We are endeavored to improve and supplement this version.
Need help?
Do you have a question about the OXY-1 ST and is the answer not in the manual?
Questions and answers