Makita 5704R Technical Information page 3

R
epair
( 4 ) Assembling lever plate
Lever plate's angle against base has to be as illustrated in Fig.4, when the machine is adjusted
to max. cutting depth.
Do not forget to assemble 2 pcs. of flat washers 8 between blade case and depth guide, when assembling
lever plate. See Fig. 4A.
Depth guide
< 2 > Replacing gear section
( 1 ) Disassembling gear section
After removing ball bearing 608ZZ, hold ring 12 installed to bearing box, with 1R031"bearing setting pipe".
And disassemble spindle by pressing it down with arbor press as illustrated in Fig. 5.
So, the gear section can be disassembled as illustrated in Fig. 5A.
Ring 12 : Hold this part with 1R031
"bearing setting pipe".
1R031 "Bearing setting pipe"
Disassembled spindle
Blade case
Fig. 5
20°
-5°
Fig. 4
Lever plate
Hex nut M8
2 pcs. of Flat washers 8
Fig. 4A
Arbor press
Ball bearing
608ZZ
Ring 12
Spindle
Fig. 5A
P 3 / 5
Helical gear 49
Sleeve 12
Bearing box