Viking C-200 Product Manual page 4

D. Using the C-200 on an Unused Trunk / Line Input
The C-200 can also be used without a phone line. This is ideal for connecting the C-200 to an unused trunk/phone
line of a phone system, or connecting to phones used only for door communications
Switch Position
1 OFF
1 ON
2 OFF
2 ON
3 OFF
3 ON
DIP Switches shown
in the factory default
ON
OFF
4
120V AC
13.8V AC
Adapter
included
* Earth Ground
(optional)
-OR-
Dedicated
Analog
Phone(s)
Description
Maximum ring count set to 3 rings
Maximum ring count set to 10 rings
Auxiliary relay activates a doorbell
Auxiliary relay activates a camera or courtesy lights for the duration the
door phone is in use
Ringing enabled (normal mode)
Ringing disabled (doorbell mode) Note: Aux Relay Contacts must be
connected to a doorbell
positions
ON
1 2 3
VIKING
©
VIKING
ELECTRONICS
HUDSON, WI 54016
SINGLE ENTRY PHONE
CONTROLLER
1 2 3 1 2 3 4 5 6 7
ON
1 2 3
EARTH C.O. LINE
GND INPUT
Analog Trunk /
Line Input of a
Phone System
Programming
VIKING
SINGLE ENTRY PHONE
1 2 3
ON
1 2 3
MODEL C-200
8 9 10 11 12
OUT TO ENTRY N.O. COM N.C. AUX POWER
PHONES PHONE AUX CONTACTS OUTPUT
Entry Door
Phone
E-40-SS
(
not included)
MODEL C-200
©
VIKING
ELECTRONICS
HUDSON, WI 54016
CONTROLLER
1 2 3 4 5 6 7 8 9 10 11 12
EARTH C.O. LINE OUT TO ENTRY N.O. COM N.C.
GND INPUT PHONES PHONE AUX CONTACTS
AUX POWER
OUTPUT