Page 2
Your child’s safety may be affected if you do not follow these instructions. Your Pioneer Pushchair is a high quality Silver Cross product. It meets current safety standards and care and regular light maintenance will ensure long service.
Page 3
Preparation for use Remove all packaging material from your Pioneer pushchair. To use your Pioneer pushchair from birth you must use the Pioneer Carrycot (included) Pioneer chassis Attach the front wheels by inserting the axles into the Pioneer frame until they ‘click’...
Page 4
Pioneer chassis Continue to lift the handle upwards until the frame ‘clicks’ and locks into position. Always check that the frame is secure.
Page 5
Using the brake WARNING ALWAYS APPLY THE PARKING BRAKE WHEN YOU ARE STANDING STILL. WARNING ALWAYS APPLY THE BREAK WHEN PLACING AND REMOVING THE CHILD. To engage the brake, press down on the red brake pedal. Listen for the ‘click’. NOTE: Always check that your brake is fully engaged by gently rocking the pushchair.
Page 6
Operating the swivel wheels Your Pioneer chassis has lockable front swivel wheels. We advise locking the front wheels if pushing the pushchair straight ahead for a long period. Rotate the swivel release lever sideways to lock the wheels into the fixed position.
Page 7
Operating the height adjustable handle Your Pioneer has a 4-position handle height. Press and hold the handle height adjustment /folding button. Slide the handle up or down to required height and release the adjustment button. The handle will lock and ‘click’ into place.
Page 8
Folding your Pioneer chassis NOTE: To ensure your Pioneer chassis folds correctly remove all items from the shopping basket before attempting to fold. NOTE: If using as a travel system (with a car seat) or pram (with Pioneer carrycot) please ensure each part has been removed before folding.
Page 9
Folding your Pioneer chassis Press and hold the fold release button. Pull the fold release triggers towards you. Push the handle downwards gently and lower the handle downwards until the fold lock engages. Lift the handle upwards gently to ensure that the chassis is folded correctly.
Page 10
Using your Pioneer from birth with the carrycot Preparing the carrycot for use Remove all packaging material from your Pioneer carrycot. First erect the carrycot outer. Lay the carrycot outer down with the frame upper most. Press the 2x metal bars into the locators on internal base of carrycot.
Page 11
Attaching the apron to the carrycot To fit the apron, unzip the lower part of the apron and keep it in a safe place. Place the apron over the top of the carrycot and secure in place using the velcro tabs. Slide the apron flap clips over the attachment points inside the carrycot frame.
Page 12
Attach the hood by pressing the hood clips onto the slots on either side of the carrycot frame. Slide the back of the Pioneer hood over the rear edge of the carrycot. Your Pioneer hood can be used in 3 positions. Fully open,...
Page 13
Attaching the bumper bar to 10.1 the carrycot or seat unit Attach the bumper bar 10.1 by pressing the ends of the bumper bar into the attachment points of the carrycot/seat unit frame. Wait to hear them ‘click’ into place. Lift gently to ensure the bumper bar is locked in place.
Page 14
Attaching the carrycot to your 11.1 chassis To attach your Pioneer carrycot 11.1 to the Pioneer chassis hold the carrycot above the chassis. Locate the carrycot chassis connector posts into the attachment slots on the chassis. Ensure that the carrycot ‘clicks’...
Page 15
The Pioneer Carrycot has a 12.2 removable liner. Simply unzip each end and release the Velcro fastenings to remove it.
Page 16
Using your Pioneer as a pushchair Your Pioneer seat unit can be fitted to the chassis in rearward-facing position (infant facing you) or forward-facing position (infant facing away from you). Follow ( ) to attach the 18.1 seat unit to the chassis.
Page 17
Using your hood 14.1 Your Pioneer hood can be 11.1 used in 3 positions. Fully open, semi-open and fully covered. silvercrossbaby.com...
Page 18
Preparing the harness 15.1 The shoulder straps have 3 15.1 height positions. To adjust, first lift the flap on the back of the seat unit. Thread the harness buckle from the front of the seat unit through to the back of the seat unit and allow the buckle to lay flat behind the seat securing the shoulder strap in place.
Page 19
(A), to make fitting easy. Your child should always be harnessed in and should never be left unattended, even for short periods of time. Your Pioneer harness can be adjusted for the size of your child. silvercrossbaby.com...
Page 20
Using your apron 17.1 The Pioneer apron comes in 17.1 2 parts. Zip on the lower part of the apron and slide the apron over the bottom of the seat unit. Clip the apron flap clips onto 17.2 the attachment points on the inside of the seat frame.
Page 21
Attaching the seat unit to 18.1 your chassis WARNING ENSURE ALL LOCKING DEVICES ARE ENGAGED BEFORE USE. To attach your Pioneer seat 18.1 unit to the Pioneer chassis hold the seat unit above the chassis. Locate the seat unit chassis connector posts into the seat attachment slots on the chassis.
Page 22
Adjusting the seat position 19.1 Your Pioneer has 3 forward-facing and 3 rearward-facing seat positions To adjust the seat position in 19.1 either forward or rearward facing mode, lift and hold the seat recline adjustment lever on the back of the seat unit.
Page 23
Using your raincover with the 20.1 carrycot or seat unit Your Pioneer raincover should 20.1 be used when the Pioneer hood is attached to either the seat unit or carrycot. First slide over the hood and down towards the toe of the seat unit or carrycot.
Page 24
Safety Notes THAT YOUR CHILD IS KEPT AWAY WHEN FOLDING AND Your Pioneer Pushchair is a high UNFOLDING THIS PRODUCT. quality Silver Cross product. It complies with AS/NZS 2088:2013 ENSURE THAT ALL LOCKING and with correct use and DEVICES ARE ENGAGED BEFORE maintenance will give good USE.
Page 25
Always hold the seat when making MAKING ADJUSTMENTS. adjustments. CARE SHOULD BE TAKEN WHEN Never try to fold your Pioneer when USING THE PRAM ON STAIRS the child is seated as this may trap the AND ESCALATORS. child. If you have difficulty in folding...
Page 26
All Silver Cross products are guaranteed for a period of 12 months against manufacturing faults, when the product is used correctly according to the instruction manual. Please read these instructions carefully before using your new Pioneer Pushchair and keep for future reference. www.silvercrossbaby.com...
Page 27
Premium Brands Pty Ltd, 10 Capital Court, Braeside Victoria 3195, Australia silvercross.com.au...
Need help?
Do you have a question about the Pioneer and is the answer not in the manual?
Questions and answers