Table of Contents
Advertisement
Message function
To write message
Select <Write Message> under MESSAGE
mode
Enter text using the number keypad. Press
RIGHT key once to clear one letter; press
and hold RIGHY key to clear the screen
Use UP/DOWN button to backspace;
For symbols, the key "i" used for the following
. ,? ! "" - () @ / : _ 1
symbols:
"*"
is used for the following symbols:
+ & %= <>${ } [ ] \ ~^
, you can press
continuous till choosing the symbol you
want..
Press number "0" once, it is used for
spacebar, press number "0" twice, it is
used for "0"
Note: If text entry is interrupted, the message
will be saved in the "Write Message" option
for later access.
...........................................................................
...........................................................................
To send message
After entering a message, then
press LEFT key , you can
choose to send message to one
number, or to group numbers
Key in the number, then press
LEFT key to confirm, the display
shows "sending...."
When the message is
; the key
successfully sent, the display
*
;
shows " Message has been
sent successfully."
If sending fails, the screen will
display"send failed"
The sent message will not
saved automaticlly.
To save message
SMS Setting
After you type a message,
To send and receive SMS messages,
press LEFT key, then select
you need your SMS Message Center
Save message
numbers. For your reference, these are
Press LEFT key again to save
two numbers that have been preset in
this message to Draft, the
your phone. Send Center NO is
display shows "Saving..."
0809101000. Receive Center NO is
01410049, You can change the pre-set
To clear all message
number if required.
Select <SMS Setting> under
MESSAGE mode, press LEFT
To change SMS Center NO
key and UP/DOWN button, and
goes to the location Clear ALL
Press LEFT key, then the
display shows "Deleted?"
Press LEFT key to confirm,
then the display show "deleted".
All messages in Inbox, outbox
and draft are deleted.
Select <SMS Setting> under MESSAGE
mode, press LEFT key and UP/DOWN
button, and goes to the location send
/receive center;
Press LEFT key, you can see the
preset number, press RIGHT key to
clear the number and key in new
number
Press LEFT key to confirm, the display
shows "saving...."
Page 9
Advertisement
Table of Contents
