Table of Contents
Advertisement
Time format
Date format
Network time
Setting Network Preferences
Network settings are primarily used by your carrier to help troubleshoot issues with your Ogo.
Table 10: Network Settings
Option
Active network
Network Selection
Scan for networks
SMS settings
Network services
GPRS status
To set the date manually:
Select Set date and press E N T E R .
1.
Type numbers in the Date fields (for example, 28/04/2005).
2.
Select Done and press E N T E R .
3.
Select the format you want to use for displaying the time.
Select the format you want to use for displaying the date.
Shows the current time and date on the network.
Shows the name of the active network.
Select Network Selection and then press E N T E R ; from the pop-up window
that appears on screen, select Auto or Manual and then press E N T E R .
To scan for available networks, select Scan for networks and press E N T E R .
This option is disabled.
Select Edit and then press E N T E R to enter the Username and Password for
sending SMS/text messages; this information must be entered in order to send
or receive SMS/text.
Select Open to open the Network services screen, where you can send a
network command. The USSD (Unstructured Supplementary Service Data)
mechanism allows you to execute commands such as pre-paid card activation,
balance check, balance reload, or cost information manipulation.
Indicates the status of your GPRS connection (Connected, Not connected,
Connection denied, Paused, or Not available). Customer Care uses this
indicator of GPRS connection to troubleshoot your device.
Description
Advertisement
Table of Contents
