Getting Started; Installing The Battery; Charging The Battery; Powering On Your Ogo - Ogo CT-25E Quick Start Manual

Getting Started

Installing the Battery

1
Turn your Ogo over and remove the back cover.
2
With the battery label facing up, match the battery contacts with the contacts in the battery slot. Push
the battery in, with the contacts side down first, as shown below:
3
Push the other side down to slide the battery into place.
4
Replace the back cover.

Charging the Battery

Connect the charger's power plug to the charging socket on the front of your Ogo (Figure 3). Charge your
Ogo for 12 hours.
Note: Make sure that the battery has been properly installed before charging or powering on your Ogo.

Powering On Your Ogo

After your Ogo is fully charged, press the Power On/Off key
screen.
Figure 2: Installing the Battery
Figure 3: Connecting the Charger
until the startup animation appears on the