Setting The Time And Date - Ogo CT-25E Quick Start Manual

With the Volume/Vibration pop-up window displayed:
•
Use the inner ring of the 8-Way Navigation key, and press up or down to increase or decrease the
volume (with audio tone).
•
To mute your Ogo, press down on the outer ring of the 8-Way Navigation key. To un-mute, press
up.
•
To turn vibration on or off, press left or right on the inner or outer ring of the 8-Way Navigation key.

Setting the Time and Date

When your Ogo is powered on, it automatically synchronizes with the current time from your carrier's
network. If for some reason the network is not available, you can set the time and date manually using the
settings on the Time & Date tab.
Note: If your network does not provide the time and date, the time and date settings are lost if you remove
the battery.
Table 9: Time and date settings
Option
Device Time
Set time
Table 9: Time and date settings (continued)
Option
Set date
Displays the time as it is currently set on your Ogo.
You can access the time manually or copy the network time. In most cases you
want to copy the network time.
To set the time by copying the network time:
Select Set time and press E N T E R .
1.
Select Copy network time and press E N T E R .
2.
Select Done and press E N T E R .
3.
To set the time manually:
Select Set time and press E N T E R .
1.
Select Time.
2.
3. Type numbers for the hour and minute and press E N T E R .
Note: Only numbers can be typed in the hour and minute fields, so using the
A L T key to type numbers is not necessary.
You can set the date manually or copy the network date. In most cases you
want to copy the network date. To set the date by copying the network date:
Select Set date and press E N T E R .
1.
Select Copy network date and press E N T E R .
2.
Select Done and press E N T E R .
3.
Description
Description