Advertisement
6 IrDA Connection via USB Cable
6 IrDA Connection via USB Cable
Connect the IrDA communication USB cable to ERX 350 as shown in the image below. Connect the other
end of the cable to a USB port on the computer where MasterLink is installed. See second image.
The
Icon will be showing when the ERX 350 is ready to communicate in IrDA mode. After an
inactivity timeout period, the unit will automatically turn off the IrDA subsystem to save battery
power. Icon will be turned off.
To help save Battery life - remove the entire IrDA adapter from the ERX 350 when IrDA
communications are no longer required
See MasterLink R510 User Guide to configure the software setting for IrDA communication
Honeywell
| 8
Advertisement
