Advertisement
GAMMA instabus
Technical Product Information
March 2008
DELTA profil
Pushbutton single
Pushbutton double
Pushbutton quadruple UP 245,
DELTA style
Pushbutton single
Pushbutton double
Pushbutton quadruple UP 287,
Product
Frame
Bus coupling unit
C5
C6
C4
C3
C7
C5
Diagram 1: Mounting the pushbutton
Product and Applications Description
There is an upper and a lower operating field on the
pushbuttons. In the middle of the pushbutton there is a
note panel in which pictograms can be inserted. This
panel also contains display elements (LEDs) for orienta-
tion lighting and also for status displays. Opposing rock-
ers are combined to form a pair e.g. for defined switch-
ing, dimming, controlling shutters and blinds.
It is also possible to carry out the switching functions
ON and OFF e.g. via a pushbutton "UP".
Using an application program, the flush-mounted
pushbuttons give commands via the flush-mounted bus
coupler for example to actuators for defined switching
on/off, for dimming lamps, raising/lowering shutters or
for louvre adjustment or other parameterisable func-
tional units.
Technical Manual
Update: http://www.siemens.de/gamma
2.16.1.5/2
UP 241,
UP 242,
UP 243,
UP 244,
UP 246,
UP 285,
UP 286,
DELTA profil
cut-out frames
C5
C6
C4
C3
C7
C5
UP 24x-28x_Taster, 7 pages
Subject to change without prior notice
neutral
with I/O symbols
neutral
with I/O symbols
neutral
with I/O symbols
neutral
neutral
neutral
DELTA style
ordered separately from the DELTA ranges
UP 110; UP 114
C1
C2
C5
C6
C4
C3
C7
C5
The device pushbutton is placed together with the rele-
vant DELTA frame on the flush-mounted bus coupler
and can only function in combination with the bus cou-
pler UP and an appropriate application program, i.e. the
pushbuttons (with bus coupler UP) consist of the de-
vices (hardware) and the application programs (soft-
ware).
The bus coupler UP and the relevant frame are not sup-
plied with the device but must be ordered separately.
Using the ETS program, the application programs can be
selected and the specific parameters and addresses can
be assigned.
© Siemens AG 200
5WG1 241-2AB_1
5WG1 242-2AB_1
5WG1 243-2AB_1
5WG1 244-2AB_1
5WG1 245-2AB_1
5WG1 246-2AB_1
5WG1 285-2AB_1
5WG1 286-2AB_1
5WG1 287-2AB_1
____
C1 Bus coupling unit
C2 Frame
C3 Fixing screws *)
C4 Basic pushbutton module *)
C5 Rockers *)
C6 Mounting rack *)
C7 Recess *)
*) Scope of supply
Siemens AG
Automation and Drives Group
Electrical Installation Technology
P.O. Box 10 09 53, D-93009 Regensburg
Advertisement
