Advertisement
GAMMA instabus
Technical Product Information
March 2008
DELTA profil
Pushbutton single
Pushbutton double
Pushbutton quadruple UP 245,
DELTA style
Pushbutton single
Pushbutton double
Pushbutton quadruple UP 287,
Drawing for mounting the fixing screws
Pushbutton single
Pushbutton double / pushbutton quadruple
Holding down as shown with pushbutton single
Diagram 4: Lifting out the rockers
Technical Manual
Update: http://www.siemens.de/gamma
2.16.1.5/6
UP 241,
neutral
UP 242,
with I/O symbols
UP 243,
neutral
UP 244,
with I/O symbols
neutral
UP 246,
with I/O symbols
UP 285,
neutral
UP 286,
neutral
neutral
C7
UP 24x-28x_Taster, 7 pages
© Siemens AG 200
Subject to change without prior notice
Inserting pictograms
• Lift out the pictogram cover (A5) with the screwdriver
by applying leverage, during this hold down the
pushbutton module (C4).
DELTA profil
• Insert the screwdriver into the slot (A2) until it
reaches the stop and then wiggle it.
1)
Diagram 5: Lifting out the pictogram cover
• Lay the pictograms onto the foundation.
• Snap on the pictogram cover (A5) again.
DELTA style
1)
2)
1)
Insert the screwdriver between the frame and
the pushbutton module.
2)
Swivel the screwdriver towards the wall.
Diagram 6: Lifting out the pictogram cover
P.O. Box 10 09 53, D-93009 Regensburg
5WG1 241-2AB_1
5WG1 242-2AB_1
5WG1 243-2AB_1
5WG1 244-2AB_1
5WG1 245-2AB_1
5WG1 246-2AB_1
5WG1 285-2AB_1
5WG1 286-2AB_1
5WG1 287-2AB_1
2)
Siemens AG
Automation and Drives Group
Electrical Installation Technology
Advertisement
