Dyson Airblade Wash+Dry Quick Start Manual

Keep it clean
The Dyson Airblade Wash+Dry hand dryer should be cleaned daily.
Follow these 3 simple steps to ensure the machine performs
to its best and remains hygienic.
1
Wipe sensors using a soft
cloth and non-abrasive
cleaner then place
cleaning cap over sensors
to prevent activation.
Important information
Most professional cleaning chemicals
can be used.
Using the wrong cleaning method or
product may invalidate the warranty.
All cleaning chemicals should be
used exactly as indicated by the
manufacturer's instructions
(including appropriate dilution).
Any chemicals intended for use should
first be tested on an inconspicuous
area to confirm suitability.
For further information please contact Dyson.
AU: 1800 426 337 AUCommercial@dyson.com
NZ: 0800 397 667 NZCommercial@dyson.com
2
Clean all tap surfaces,
sink, mirror and any walls or
counter tops. When complete
REMEMBER to remove
cleaning cap.
Aside from cleaning chemicals, care
should be taken to avoid any harmful
fluids from coming into contact with
the product, in particular oils and
alcohol-based products.
Do not pressure wash the machine.
The following are some that are
harmful to the machine.
3
REGULARLY clean air inlets
on base of motor bucket
(under sink). Ensure plughole
in sink is free from blockages
so water can drain freely.
DO NOT USE
Alcohol-acid mixes
Alcohol
Solvent/oil-based mixes
Quaternary ammonium
Alkali-bleach mixes
Foaming ingredients
Bleach or abrasive cleaners