Tripod Mounting - Bushnell Trophy Xtreme Instruction Manual

Thank you for purchasing your new Bushnell Trophy Xtreme™ Spotting Scope.
This manual will help you optimize your viewing experience by explaining how to utilize the
scope's controls and features, and how to care for it. Read the instructions carefully before using
your scope.

TRIPOD MOUNTING

After setting up your tripod on a stable, level surface, fasten the scope's
mounting base to the screw on the tripod's platform, so that the scope is
held securely in place. See "Using the Tripod/Car Window Mount".
USING the ZOOM EYEPIECE and FOCUSING
Rotate the zoom ring on the eyepiece to change magnifying power from
low to high. Lower power settings will provide a brighter image with a wider
field of view; higher powers allow observing smaller details on more distant
subjects. To reduce the need to readjust focus when zooming, set the zoom
Eyecup Extended
to its highest power and focus on your subject. When you zoom back
down to lower powers, it will stay in focus. Note: the zoom eyepiece is not
interchangeable. Do not attempt to remove it from the scope.
USING the TWIST-UP EYECUP and SLIDING SUN SHADE
If you are not wearing glasses, twist the rubber eyecup counter-clockwise
to extend it. If you experience glare or lens flare due to the angle and
direction of the sun relative to the front lens, pull the sun shade out to
Sun Shade Extended
extend it.
3