Cleaning Mode - Sony NEX-VG10 Handycam&reg Handbook

Cleaning Mode

Allows you to clean the image sensor.
1 MENU button t [Setup] t [Cleaning Mode] t [OK].
The message "After cleaning, turn camera off. Continue?" appears.
2 Confirm [OK].
The anti-dust is activated automatically.
3 Turn off the camcorder and detach the lens.
4 Use a blower to clean the image sensor
surface and the surrounding area.
5 Attach the lens.
Notes
• Cleaning can be performed only when the battery level is
recommend that you use the AC Adaptor.
• Do not use a spray blower because it may scatter water droplets inside the camcorder body.
• Do not put the tip of a blower into the cavity beyond the mount, so that the tip of the blower does not
touch the image sensor.
• Hold the camcorder's face downward to prevent the dust from resettling in the camcorder.
• Do not apply a mechanical shock to the camcorder during cleaning.
(3 remaining battery icons) or more. We
GB
65