Anti Motion Blur - Sony NEX-VG10 Handycam&reg Handbook

Anti Motion Blur

This is suitable for indoor shots without using a flash (sold separately), to reduce the
subject blur.
This item is available in still image recording mode only.
1 Press the control dial and select [Anti Motion Blur].
Or, MENU button t [Shoot Mode] t [Anti Motion Blur].
appears on the screen.
2 Shoot with the PHOTO button.
The camcorder combines 6 shots at high sensitivity into 1 still image, so camera shake is
reduced while preventing noise.
Notes
• The shutter clicks 7 times and an image is recorded.
• Reducing blur is less effective when shooting:
– Subjects with erratic movement.
– Subjects that are too close to the camcorder.
– Subjects with a repeating pattern such as tiles, and subjects with little contrast such as sky, sandy
beach, or lawn.
– Subjects with constant change such as waves or water falls.
• When using a light source that flickers, such as fluorescent lighting, block noise may occur.
• The noise reduction function does not work.
• [Shoot Mode] becomes [Program Auto] when movie recording mode is selected.
GB
29