Playback; Setup - Sony NEX-VG10 Handycam&reg Handbook

Playback

Allows you to set playback functions.
Delete
Movie/Still Select
Image Index
Protect
Still Slide Show*
Enlarge Still image*
Display Contents During playback
* Still image only

Setup

Allows you to make more detailed shooting settings, or change the camcorder settings.
Shooting Settings
Movie Audio Rec
Grid Line
Shoot w/o Lens
Red Eye Reduction*
Auto Review*
Main Settings
Volume Settings
Beep
Language
Date/Time Setup
Area Setting
Power Save
LCD Brightness
Viewfinder Bright.
Cleaning Mode
Version
Demo Mode
Reset Default
Deletes images.
Selects a movie or still image to play back.
Selects the number of images to be displayed on the index
screen.
Protects images, or cancels the protection.
Plays back still images automatically.
Enlarges the still image.
Switches the information to be displayed on the playback
screen.
Sets whether or not to record the sound for movie recording.
Turns on the grid line that helps you to adjust the
composition of images.
Sets whether or not to record images when there is no lens.
When using a flash (sold separately), prevents eyes from
being shot in red.
Shows the image right after shooting.
Sets the sound volume of movies.
Sets the sound produced when you operate the camcorder.
Selects the language used on the screen.
Sets the date and time.
Selects the area where you are using the camcorder.
Turns the camcorder to the power save mode.
Sets the brightness of the LCD monitor.
Sets the brightness of the viewfinder.
Allows you to clean the image sensor.
Displays the version of the camcorder and the lens.
Sets whether or not to use the movie for the demonstration.
Resets the camcorder to the factory-settings.
GB
12
Continued r