Selecting The Recording Channel - Sony HVR-Z1E/Z1P Operating Instructions Manual

To connect the cable of the microphone
or audio device
Align the pins of the plug to the INPUT1 or
INPUT2 connectors, and connect them
securely.
XLR connector (male)

Selecting the recording channel

The following settings are required to record
the audio source connected to the INPUT1 or
INPUT2 connector.
40
Recording
1
In the standby mode, press MENU.
2
Select the (AUDIO SET) menu by
turning the SEL/PUSH EXEC dial,
then press the dial.
3
Select [MIC SELECT] by turning the
SEL/PUSH EXEC dial, then press the
dial.
4
Select [XLR] by turning the SEL/
PUSH EXEC dial, then press the dial.
5
Select [XLR SET] by turning the SEL/
PUSH EXEC dial, then press the dial.
6
Select [XLR CH SET] by turning the
SEL/PUSH EXEC dial, then press the
dial.
7
Select a channel by turning the SEL/
PUSH EXEC dial, then press the dial.
Connector XLR CH
SET
INPUT1 CH1
CH1, CH2
INPUT2 CH1
CH1, CH2
8
Set [INPUT1 LEVEL] or [INPUT2
LEVEL], and the PHANTOM switch
for each connector.
Source Con-
nector
Micro- INPUT1
phone
INPUT2
Recorded
channel
Channel 1
Channel 1
Channel 2
Channel 2
None
Menu PHAN-
TOM
switch
[INPUT1 ON
LEVEL] –
[MIC]
[INPUT2 ON
LEVEL] –
[MIC]