Setting time values
Your camcorder uses 2 types of time values:
time code values and user bits.
Setting the time code value
1
Set the POWER switch to VCR or
CAMERA.
2
Press MENU.
3
Select the
by turning the SEL/PUSH EXEC dial,
then press the dial.
4
Select [TC MAKE] by turning the
SEL/PUSH EXEC dial, then press the
dial.
102
Dubbing/Editing
POWER switch
(TC/UB SET) menu
5
Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
6
Set the time code value.
1
Select [TC PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
2
Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
3
Select the first 2 digits by turning the
SEL/PUSH EXEC dial, then press the
dial.
Set a time code between 00:00:00:00 and
23:59:59:24.
4
Repeat step 3 to set up the other digits.
5
Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
7
Select the frame mode.
1
Select [TC FORMAT] by turning the
SEL/PUSH EXEC dial, then press the
dial.
2
Select the frame mode by turning the
SEL/PUSH EXEC dial, then press the
dial.
Setting
To
AUTO
set the mode automatically in
accordance with the inserted
cassette
DF
select the drop frame mode
NDF
select the non-drop frame mode
8
Select the running mode.
1
Select [TC RUN] by turning the SEL/
PUSH EXEC dial, then press the dial.
2
Select the running mode by turning the
SEL/PUSH EXEC dial, then press the
dial.
Setting
To
REC RUN
advance the time code value
only while recording. Select
this when making the time cord
continuous at backspace
editing.