Customizing The Sound; Adjusting The Audio Recording Level - Microphone Volume Level - Sony HVR-Z1E/Z1P Operating Instructions Manual

If you decide not to reset the picture profile,
select [NO].
6
Press PICTURE PROFILE.
b Note
• If you select [TYPE3] in [SKINTONE DTL], the
effect may also be applied to a color that is not a skin
color.
• When [SKINTONE DTL] is set to [OFF],
[SKINTONE LVL] setting will not be effective, and
the edge of the part of skin color will be enhanced at
the highest level.
• If you adjust all of the iris, shutter speed and gain
manually, you cannot obtain the effect of [AE
SHIFT].
• If you adjust the iris manually, you cannot obtain the
effect of [AT IRIS LMT].
• If the object is so bright that the aperture value set in
[AT IRIS LMT] is not appropriate, the shutter speed
may reach:
– up to 1/1750 when [50i/60i SEL] on the
(OTHERS) menu is set to 50i.
– up to 1/2000 when [50i/60i SEL] on the
(OTHERS) menu is set to 60i.
• If you adjust the gain manually, you cannot obtain
the effect of [AGC LIMIT].
• If you select [CINEFRAME 25] when the shutter
speed is slower than 1/12, the shutter speed is
automatically set to 1/25.
• If you select [CINEFRAME 24] when the shutter
speed is slower than 1/30, the shutter speed is
automatically set to 1/60.
• If you select [CINEFRAME 30] when the shutter
speed is slower than 1/15, the shutter speed is
automatically set to 1/30.
• If you change the setting of [50i/60i SEL] on the
(OTHERS) menu, [CINEFRAME] is set to [OFF]
for PP1 through PP6.
38
Recording
Customizing the
sound
Adjusting the audio recording
level – Microphone volume level
You can adjust the microphone volume while
recording. Checking the volume with
headphones is recommended.
If you input external audio sources, you can
adjust the recording level of channel 1 and
channel 2 separately.
(To adjust the volume of the internal
microphone, operate the AUDIO SELECT
CH1 switch and the CH1 dial. The recording
level of channel 1 and channel 2 are adjusted
in unison.)
1
Set the AUDIO SELECT switch of the
channel to be adjusted (CH1 or CH2)
to MAN.
To adjust the internal microphone, set the
CH1 switch to MAN.