Ipod/Iphone; Preparation; Ipod/Iphone Basic Operation - Kenwood DNR876S Instruction Manual

iPod/iPhone

iPod/iPhone

Preparation

Ñ
Connectable iPod/iPhone
The following models can be connected to
this unit.
Made for
• iPhone X
• iPhone 8 Plus
• iPhone 8
• iPhone 7 Plus
• iPhone 7
• iPhone SE
• iPhone 6s Plus
• iPhone 6s
NOTE
• Latest compatible list of iPod/iPhone. For details,
see www.kenwood.com/cs/ce/ipod/.
• By connecting your iPod/iPhone to this unit with
the iPod connection cable KCA-iP103 (optional
accessory), you can supply power to your iPod/
iPhone as well as charge it while playing music.
Note that the power of this unit must be held on.
• If you restart playback after connecting the iPod,
the music that has been played by the iPod is
played first.
Ñ
Connect iPod/iPhone
Wired connection
Preparation
• Connect an iPod/iPhone with the KCA-iP103
(optional accessory) while Apple CarPlay is not
connected.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.
• Plug the iPod/iPhone into the gray USB terminal
with the KCA-iP103 (optional accessory).
(DNX996XR / DNR876S / DNX696S only)
• Plug the iPod/iPhone into the USB terminal with
the KCA-iP103 (optional accessory).
(DNX576S / DNR46EX / DNR476S only)
• Only one iPod/iPhone can be connected.
48
• iPhone 6 Plus
• iPhone 6
• iPhone 5s
• iPhone 5c
• iPhone 5
• iPod touch (6th
generation)
1
Connect the iPod/iPhone using the KCA-
iP103. (P.115)
2
Press the [HOME]/[ ] button.
3
Touch [
].
4
Touch [iPod]. (P.15)
● To disconnect the iPod/iPhone connected
with the cable:
1
Detach the iPod/iPhone.
Bluetooth connection
Pair the iPhone through Bluetooth.
Preparation
• To connect an iPhone via Bluetooth, register it
as a Bluetooth device and do the profile setting
for the connection beforehand. See Register the
Bluetooth device (P.73) and Connect the
Bluetooth device (P.74).
• Connect an iPhone via Bluetooth while Apple
CarPlay and an iPod/iPhone are not connected
via USB.
• With an Apple CarPlay-capable iPhone, turn
off Apple CarPlay by operating the iPhone at
functional setup before connecting iPhone.
For details of the setup method, contact the
manufacturer of the terminal.

iPod/iPhone Basic Operation

NOTE
• Set the remote controller mode switch to AUD
mode before starting operation, see Switch the
operation mode (P.104).
Control screen
1
2
3
4
5