Advertisement
3. RECEIVING AND UNPACKING
WARNING : If any parts are damaged or missing.
Do not install that has been damaged.
Make the following checks after unpacking :
(1) Check if there is any damage , foreign matter trapped , or water seepage
into the contactor.
(2) Check the nameplate to see if the specifications on the plate are correct.
(3) Check the contact wear gauge and control cable.
(4) Check the tripping rod (Latched type).
4．STORAGE AND HANDLING
When the contactor is to be stored over a long period , the storage area
should be dry and dust free area.
If the contactor is left outdoors or in adverse conditions , corrosion
from gas , rust or insulation deterioration may result.
CAUTION : In handling , do not throw or drop contactor.
The contactor may break.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
-
５ -
6F9G0154
Advertisement
