Sony HDR-TD10 Handycam&reg Operating Manual page 28


Set the 2D/3D switch to 2D.

Press MODE to turn on the
The LCD screen display switches for photo recording mode, and the screen aspect ratio
becomes 4:3.

Press PHOTO lightly to adjust the focus, then press it fully.

Note
You cannot shoot photos in 3D.

Tips

To change the image size, touch

setting 
You cannot record photos while

Your camcorder flashes automatically when there is insufficient ambient light. The flash does not work in

the movie recording mode. You can change how your camcorder flashes by
Mic]  [ ( Flash)]  [Flash]  a desired setting 
If white circular spots appear on photos
This is caused by particles (dust, pollen, etc.) floating close to the lens. When they are
accentuated by the camcorder's flash, they appear as white circular spots.
To reduce the white circular spots, light the room and shoot the subject without a flash.
US

(MENU)  [Image Quality/Size]  [
.
is displayed.
Particles (dust, pollen, etc.)
in the air
(Photo) lamp.
.
Image Size]  a desired
(MENU)  [Camera/