Table of Contents
Advertisement
Thermal circuit breaker
Turbo Heater
Bi Metal
Sensitivity: Public
Turbo and multifunctional oven is
defrosting works alone. Turbo working
positions with resistance, heat
resistance turbo fan properly into the
oven via the corporate network.
The purpose of the thermal breaker oven
thermostat on a heater of a short circuit or a
short circuit as a result of any case of
continuous operation without exceeding a
specific value in the temperature of the oven
used in phase or nötr'ü aim to cut. Thermal
circuit breaker-point temperature of the oven is
installed on the furnace is running normal to the
reference formed not only under normal
circumstances not to cut the circuit must break
the circuit.
Turbo and multifunctional ovens, oven
On the wall in the back of the chassis
embedded resistor (heating element). This air is
drawn over the surface with the aid of suction
holes and the suction holes on the rear wall with
vent holes blown. Trays heated air through the
upper and lower surfaces of the cooking event
would take place. The heating element and the
fan, the control button on the control panel is
controlled by the oven heater.
Any wrong operation of the oven, but with bi-
metal type thermal circuit breaker protected. Bi-
metal type thermal circuit breaker Pyro bakery
ovens, furnaces external frame in the left rear
upper tarafındadır.Fırın a temperature between
350-400 ° C. When the phase conductor
feeding separates **.
51
Advertisement
Table of Contents
