Using The (Audio Set) Menu; Audio Mix, Etc; Audio Mode - Sony Handycam HDR-FX1E Operating Instructions Manual

Using the
SET) menu
You can select the items listed below on the
AUDIO SET menu. For details on how to select
items, see "Selecting menu items" (p. 51).
The default settings are marked with G. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
MULTI-SOUND
AUDIO MIX

AUDIO MODE

56
Using the Menu
(AUDIO

– AUDIO MIX, etc.

You can select how to play back audio on a tape that was recorded in stereo mode
using another camcorder.
GSTEREO
Select to play back a stereo tape or dual sound track tape with both
main and sub sound.
1
Select to play back a stereo tape with the left channel sound or a dual
sound track tape with the main sound.
2
Select to play back a stereo tape with the right channel sound or a dual
sound track tape with the sub sound.
Note
b
• You can play back a dual sound track cassette on this camcorder. However, you cannot
record a dual sound track on this camcorder.
• The setting returns to [STEREO] when you disconnect the power source from your
camcorder for more than 5 minutes.
You can adjust the audio balance between the originally recorded sound (ST1)
and sound added afterwards (ST2) on the tape (p. 79).
Note
b
• You cannot adjust sound recorded in 16 bit audio mode.
• Only the originally recorded sound will be heard when you disconnect the power source
from your camcorder for more than 5 minutes.
G12BIT
Select to record in the 12-bit mode (2 stereo sounds).
16BIT ( ) Select to record in the 16-bit mode (1 stereo sound with high quality).
Note
b
• When recording in the HDV format, sound is automatically recorded in [16BIT] mode.
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
AUD I O SET
RETURN
MULT I –SOUND STEREO
AUD I O MIX
AUD I O MODE
WIND
M I C / L I NE I N
[ MENU ] : END