Description PX376 is a multimedia player controlled by DMX protocol. The player allows to play the video files in Full HD, audio files and images. In case of the loss of DMX signal, it can operate independently according to the pre-programmed settings. The device is equipped with DMX input and output, 4 USB ports, HDMI and micro USB interface.
Safety conditions PX376 media player is a powered by low voltage of 5V DC, however, please observe the following safety rules during its installation and use: 1. The device can be connected only to the power supply of 5V DC with a load capacity compatible with technical data.
Connectors and control elements Back of the device: micro USB power analogue output input HDMI output Front of the device: 4 USB ports 10/100TX Ethernet port...
Side of the device: DMX IN DMX OUT Supported file formats The player supports the following file formats: Video Audio Imagines *.mpg *.mp3 *.jpg *.mp4 *.wmv *.jpeg *.mpeg *.ogg *.png *.avi *.wav *.mkv...
The installation is as follows: 1. Open an installation file, click [Next], to go to the PX376 setup wizard. The installation file is attached to the driver on a CD, or it is available for download from the manufacturer website (pxm.pl).
Structure of the application window The application window is divided into three panels: created configuration list • configuration editing panel • list of devices detected in the network • configuration created configuration editing panel list list of devices detected in the network...
The device will be visible on the network under the name assigned to it in the [Device name]. The PX376 is controlled by 4 consecutive DMX channels. The first of the channel is identified in the [DMX address] field. When uploading the same configuration into several devices, it is possible to assign to them individual names and addresses.
Page 10
device label password Device DMX address (1 – 509) image viewing (when images are displayed as part of the playlist, 1 – 100 seconds) action in case of a loss of DMX signal selection of options for displaying subtitles and their language version control option selection A playlist can contain up to 85 tracks (videos, images or music), whose...
[Playlist] – in which, you must load all the files to be played by the player and set them in the right order buttons to modify the content of the playlist 6.3 List of devices The list displays all devices that have been browsed through in the network.
Page 12
To search for devices in a local network in the [Devices] menu select the [Search] command. All devices found are displayed in the device list. [Set background] – an image that is displayed when no file is uploaded. The default background color is black, but any different image in the *.jpg format can be uploaded.
Page 13
Network configuration: if the function is selected, address will be automatically assigned from a DHCP server, if not – a static address will be used IP address, network mask and gateway address – static network parameters of the player To download configuration from the device: 1.
The device will work only when one of USB ports has properly formatted USB memory with an uploaded configuration file and tracks to be played. Files can be uploaded to the USB memory that is directly plugged into a computer or memory plugged into the PX376 device via the Ethernet network.
In case of UDP control, these are four values transmitted using UDP packets. A UDP packed comprises a “px376” header and 4 bytes containing values for the respective control channels. The device is controlled by 4 DMX channels: channel 1: command •...
Page 16
channel 3: playback mode • Value on the channel Mode 0 – 63 single 64 – 127 loop single 128 – 191 playlist 192 – 249 loop playlist 250 – 255 shuffle Description of playback modes: [Single] – playing the track once [Loop single] –...
– signal disabling on the HDMI output 7.3 Access via FTP It is possible to connect to the player via the FTP protocol and upload or download multimedia files. Connection parameters: Server: current device IP address (assigned from DHCP) User: px376 Password: px376...
USB flash drive plugged into a computer – in this situation it is possible to upload the configuration to one USB stick only b) directly to PX376 plugged into a computer using LAN network – in this situation it is possible to upload to a number of players at the same time 1.
Page 19
5. From the menu select: [USB] → [Write configuration]. The application searches for the memory with the appropriate label (PX376) and uploads the configuration file to it, as well as selected tracks. If the USB drive contains tracks not included on the playlist, the application will ask if you want to remove them.
Uploading configuration using LAN network: 6. From the menu select: [Devices] → [Search]. 7. Select the devices to which the configuration will be uploaded by selecting the checkbox ☑. 8. Save the configuration on the USB by clicking [Upload to selected]. 9.
Page 21
b) diagram of connecting devices to the projector with using the included cable, analog audio-video DMX controller e.g PX333 DMX- DMX+ for further components DMX IN DMX OUT PENDRIVE analog Audio R Projector Video Audio L 230 V 5V DC power supply unit included with the device...
11 Technical data type PX376 control DMX-512 protocol, UDP optical isolation of DMX line mkv, avi, mpeg, mp4, ogg, wmv, mpg, supported file formats mp3, wav, jpg, jpeg, png number of supported files max. 85 image quality Full HD (1920 x 1080p)
Page 24
Podłęże, 04.04.2019 DECLARATION OF CONFORMITY PXM Marek Żupnik spółka komandytowa Podłęże 654, 32-003 Podłęże we declare that our product: Product name: HD Multimedia Player Product code: PX376 meets the requirements of the following standards, as well as harmonised standards: PN-EN IEC 63000:2019-01...
Need help?
Do you have a question about the PX376 and is the answer not in the manual?
Questions and answers