Maintenance Instructions / Troubleshooting - XPower X-8 Owner's Manual

1. To keep the unit clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Axial Air Mover directly with water.
3. When not in use, unplug and store the unit in a dry indoor place out of reach of children.
4. Always disconnect from its power source before performing any maintenance or cleaning.
SYMPTOM
Motor Not Running
Scraping Noise From Fan
Weak Air Flow
Repairs: Any internal repairs should be performed by a qualified technician. Call your local
distributor or contact our Service Department at 626-285-3301.
Maintenance Instructions
Troubleshooting
PROBABLE CAUSE
Switched Off
Power failure
Wiring failure
Obstructions at the
intake or exhaust of fan
Fan broken
Obstructed vents/inlets
- 5 -
ACTION
Make sure unit is plugged in
and switch is turned to ON
position.
Check outlet/Change to
another outlet
Contact XPOWER for repair
Remove obstruction(s)
Contact XPOWER for repair
Unplug unit to clean vents and inlets