Recording In Mirror Mode; Automatically - Sony Handycam HDR-XR500V Owner's Manual

HDR-XR500V/XR520V
Infrared port
When you want to record images in dim light, set the STD/LOW LUX/NIGHTSHOT switch
to LOW LUX. appears, and images will be recorded brighter than if you do not use LOW
LUX.
When you set the STD/LOW LUX/NIGHTSHOT switch to NIGHTSHOT,
you can record images even in total darkness.
Set the STD/LOW LUX/NIGHTSHOT switch to STD when recording in normal ambient
light.

Notes
The NightShot function uses infrared light. Therefore, do not cover the infrared port with your fingers or

other objects.
Remove the conversion lens (sold separately).

Adjust the focus manually ([FOCUS], p. 103) when it is hard to focus automatically.

Do not use the NightShot function in bright places. This may cause a malfunction.


Recording in mirror mode

Open the LCD panel 90 degrees to the camcorder , then rotate it 180 degrees to the lens
side .
Tips

A mirror-image of the subject appears on the LCD screen, but the image will be normal when recorded.


appears, and