Toro Power Curve 1800 Operator's Manual page 13

8. Keep extension cord clear of obstructions, sharp
objects and all moving parts. Do not pull sharply
on cord or abuse it in any manner. Frequently
inspect cord for damage which could result in
electric shock. If cord becomes damaged in any
way, replace it.
9. In some snow and cold weather conditions, some
controls and moving parts may freeze. Therefore,
when any control becomes hard to operate, stop
the motor by releasing the control bar,
disconnect the extension cord and check all parts
for freeze up. DO NOT USE EXCESSIVE
FORCE WHEN TRYING TO OPERATE
THE CONTROLS IF FROZEN. Free all
controls and moving parts before operating.
10. When operating snowthrower, keep snowthrower
wheels one inch off pavement by tipping unit
forward. This helps prevent snow from building
up on wheels.
11. AFTER CLEARING SNOW—Let motor run for
a few minutes so ice doesn't freeze moving
parts. After motor is shut off, wipe ice and snow
off entire unit. Rotate chute crank several times
to clear mechanism of snow.
12. Lock snowthrower when unit is not being used.
Disconnect extension cord. Hold key down, turn
clockwise and remove key from handle to
prevent unauthorized use of machine. Store key
in a memorable place.
Operation
EN-11