User Menus And Parameters - LG Therma V Owner's Manual

User menus and parameters

NOTE
The display of the TERMOTRONIC™ controller interface shows only those menus dependent on
the type of device and were actually activated during the start-up of the device.
Menu structure
Parameter
Basic menu
name
HEATING
C/W I
Schedule
Normal
Eco
Comfort
Hysteresis
Const.
Temperature
Correction
Parameter
COOLING
name
Schedule
Adjustable
Scope [°C]
value
I
19.9 19.9...max.
-2.0 -10.0...0.0
2.0 0.0...10.0
3.0 0.0...10.0
50
5.0 0.0...15.0
Adjustable
Scope [°C]
value
User menus and parameters
Parameter description
By setting this parameter, we can raise/lower the tempera-
ture for up to 4 temperature steps.
Example: I>> means that the currently set temperature of
the circuit (the setting in the parameter Normal) is raised
for 2 temperature steps.
For settings, see chapter(schedules)
The desired temperature of heating in the Normal mode of
operation.
Lowering the desired temperature in the Eco mode of
operation.
Raising the desired temperature in the Comfort mode of
operation.
By setting this parameter, we change the desired tempera-
ture of the restarted device with the parameter Hysteresis
from 0 °C to 10 °C.
Example:
The parameter Heating is 56 °C. The device will be in
standby from 53 °C to 56 °C.
Heating with constant temperature "Const.
Temperature" or optimised heating according to external
temperature "Heating Curve" OG. MK.
The correction of the breaking point of the weather curve
at +15°C.
Parameter description
For settings see chapter(schedules)
Owner's Manual 45