3Com PathBuilder S200 Series User Manual page 22

Administration
16
Term
EIA Summary State: The current state of the EIA signals. For a complete
listing of EIA states, refer to the Configuration Basics Guide.
• Input:
DTR (Data Terminal Ready)
RTS (Request to Send)
MB (Make Busy)
P14 Ignored
Note
These signals are monitored by the Control Terminal Port.
• Output:
DSR (Data Set Ready)
DCD (Carrier Detect)
RI (Ring Indicator)
CTS (Clear to Send)
Note
These signals are generated by the PathBuilder S200 series
switch port.
Call Summary Current Status:
• Connected: Call is connected
• Disconnected: Call is disconnected
• Called: PAD Port is being called
• Calling: PAD Port attempting to establish a call
• Clearing: Call is in process of being cleared
• Local Copy: PAD Port is in local copy mode
• Time until Next Autocall Attempt: Specifies the time
interval between Autocall attempts in seconds
• Number of Autocall Attempts: Specifies the number of
times the Host PAD or the Remote PAD attempts to call
when Autocalling is enabled
• Last Clear Cause or Last Clear Diagnostic Code: These
messages explain why the last call was cleared. For more
information, refer to the Configuration Basics Guide.
Last Inbound • Called Address: Works in conjunction with the link's
Call Inbound Called Address for inbound calls
• Calling Address: Works in conjunction with the link's
Inbound Calling Address for inbound calls
• Facilities: Parameter and option settings that are checked
during inbound call processing
• CUD: Specifies that the subaddress for the call is carried in
the Call User Data (CUD) field of a call request
Description (continued)
Transparent Polled Async