Performance Screen; Jog Dial Display Section - Pioneer XDJ-1000 Operating Instructions Manual

Multi player
Hide thumbs Also See for XDJ-1000:
Table of Contents

Advertisement

d QUANTIZE
Touch to use the quantize function.
When the quantize function is set to on, the point is automatically
set to the nearest beat position when a loop in point, loop out point
or cue is set.
Also, looping, reversing, slipping, etc., can be used without breaking
the beat.
! When the quantize function is set to on, [QUANTIZE] is displayed
on the main unit display.
The quantize function is disabled (displayed in gray color) when you
play a music file which is not analyzed by rekordbox.
e BEAT SYNC
Use this to turn on the beat sync function.
= Using the beat sync function (p. 23 )

Performance screen

1
1 BEAT JUMP (LOOP MOVE)
Loop move function can be used in loop status.
= Using beat jump (p. 21 )
= Using loop move (p. 22 )
2 HOT CUE (A,B,C)
= Playing hot cues (p. 20 )

Jog dial display section

f BEAT SYNC MASTER
Use this to set the track loaded in this unit as the master for the beat
sync function.
= Using the beat sync function (p. 23 )
g TIME (A. CUE)
When touched, the time display (remaining time display or elapsed
time display) gets switched on.
When touch and hold for over 1 second, the auto cue turns on/off.
= Setting auto cue (p. 19 )
h Waveform display
= Playing from the position on the waveform which was touched (p.
23 )
2
3
3 HOT CUE (REC)
= Setting Hot Cue (p. 20 )
4 HOT CUE (CALL)
= Calling out hot cues (p. 21 )
1 Operation display
This displays a playback position with 1 loop of 1.8 seconds. It turns
during playback and stops in the pause mode.
2 Cue point display/slip play display
1
3 Audio memory status display
This flashes when the audio memory is being written. It stops flash-
2
ing, remaining lit, when writing is completed.
3
It may not be possible to perform the real time cue operation while
4
the audio memory is being written.
The display also flashes when there is not enough memory due to
5
scratch play.
4 Jog touch detection display
When the jog mode is set to VINYL, the top of the jog dial lights when
pressed.
5 VINYL
This lights when the jog mode is set to VINYL.
= Switching the jog dial mode (p. 18 )
4
15
En

Advertisement

Table of Contents
loading

Table of Contents