Pioneer PL-X340 Operating Instructions Manual

Operating
Instructions
STEREO TURNTABLE
Thank you for buying this Pioneer product.
Please read through these operating instructions so you will
know how to operate your model properly. After you have
finished reading the instructions, put them away in a safe
place for future reference.
In some countries or regions, the shape of the power plug
and power outlet may sometimes differ from that shown in
the explanatory drawings. However, the method of connect-
Mmase/
PL-X340
ing and operating the unit is the same.
WARNING: To PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IMPORTANT NOTICE
(For U.S. and Canadian models]
The serial number for this equipment is located on the rear
panel. Please write this serial number on your enclosed warranty
card and keep it in a secure area. This is for your security.
[ This product is manufactured to comply with the radio
interference requirements of EEC Directive 76/889/EEC and
| 82/49 9/EEC.""
LINE VOLTAGE SELECTOR SWITCH
Oniy multi-voitage models are provided with this switch.
U.S., Canadian, European, U.K., and Australian models are
not provided with this switch.
Mains voltages in Saudi Arabia are 127V and 220V only.
The line voltage selector switch is located on the top of the
cabinet of this turntable, Before your turntable is shipped from
the factory, the switch is set to the power requirements of the
turntable's destination, Check that it is set properly before
plugging the power cord into the outlet. If the voltage is not
properly set or if you move to an area where the voltage require-
ments differ, adjust the selector switch as follows:
* Use a medium-sized screwdriver, insert the tip of the screw-
driver into the groove of the selector switch and tum it so that
the power voltage marking of your area points to the arrow.
1
YQ PIONEER'
The future of sound and vision.