Epson SureColor F6000 Series Settings Manual page 32

9-1 Request for customer
First ink refill after initial setup
Second ink refill and after
インク残量を確認して
ください。
When this message appears,
check ink level of the tank which
is indicated by .
③
Replace chip unit with new one
attached to new ink pack.
SEGroup Confidential Until: Permanent
Replace chip unit and refill ink when ink
level from bottom of the tank becomes
about70mm.
①
Ink level is more than 70mm:
Recommends to continue using the printer until
the ink level reaches 70mm from the bottom.
Ink level is about 70mm: Go to step 2.
②
Replace chip unit with new
one attached to new ink
pack.