Color Kinetics iColor Player Product Manual page 9

You can also download ColorPlay 3 software
E
from the Color Kinetics website, at www.
colorkinetics.com/support/colorplay3/. Save the
download to an accessible location on your
computer, then follow the on-screen instructions
to install the software.
To ensure proper operation, accept all
E
prompts for installing drivers that may appear
during the installation process.
For best results, we recommend connecting
E
iColor Player directly to the USB port on a
computer, not via a USB hub.
Configuring iColor Player Effects
and Light Shows
With ColorPlay 3 light show authoring and configuration software, you can
modify iColor Player effects or author your own custom light show, then
download the effect or show to iColor Player. iColor Player automatically
plays the downloaded show when powered up and connected to the lighting
network.
Installing ColorPlay 3 Software
Install ColorPlay 3 v. 1.11 or higher software on a Mac or Windows PC with the
included CD, then connect the computer to your lighting network.
To install ColorPlay 3 v. 1.11 or higher software:
1.
Insert the included CD into a drive on a Mac or Windows computer.
2.
Navigate to the folder containing the ColorPlay 3 installation files, and
start the installation.
3. Follow the on-screen instructions to install the ColorPlay 3 software.
Connecting to iColor Player from ColorPlay 3
To use ColorPlay 3 to modify and download effects and custom shows to iColor
Player, you must connect iColor Player to a computer running ColorPlay 3
software.
To connect to iColor Player from ColorPlay 3:
1.
If necessary, disconnect the USB cable from the USB power supply.
2.
Connect the USB cable to a USB port on a Windows or Mac computer
running ColorPlay 3.
3. From the drop-down list at the top of the Configuration layer within
ColorPlay 3, select iColor Player.
iColor Player Product Guide 9