Color Kinetics iColor Player Product Manual page 10

4.
Click Connect. If the connection is successful, the Configuration layer
displays "Connected."
Modifying, Downloading, and Playing Shows
and Effects
By default, iColor Player is configured to play the built-in Color Wash effect with
an interval of 30 seconds. In addition, the installed microSD card contains a
show, DEFAULT.SHO, which plays a Chasing Rainbow effect with a 10-second
duration.
When connected to iColor Player from ColorPlay 3, you can use the
Configuration tab to modify effect settings, download a custom show, and
change what iColor Player plays (the current effect settings, the downloaded
show, or nothing).
To modify built-in effect settings and play the modified effect:
1.
Click the Controller Settings tab.
2.
If currently set to play the rendered show or nothing, double-click the Play
property's value, select Effect from the drop-down list, and press Enter.
3. Double-click the Effect property's value, and select the effect you want
to use from the drop-down list (Fixed Color, Color Wash, Rainbow Wash,
Chasing, Random Color, or Fixed White). Effect properties vary depending
on which effect you select.
4. Modify the effect properties as desired. (Refer to "iColor Player Effects and
Their Properties" on the following page for details.)
5.
When you've finished modifying effect properties, click the Copy
Configuration to Controller button to download the effect settings to
iColor Player.
10 iColor Player Product Guide
Copy Configuration To Controller button
Example configuration panel for the Chasing
effect
Do not disconnect iColor Player
E
from the computer when connected
to ColorPlay 3, or the system will not
function properly. Instead, click the
Disconnect button on the Configuration
tab to disconnect ColorPlay 3 from
iColor Player., then disconnect iColor
Player from the computer.