Advertisement
Quick Links
Advertisement
Summary of Contents for SONIQ M301R
- Page 2 M301R / M301C Bluetooth turntable multi-function player Instruction manual Read this instruction manual carefully before use...
- Page 3 Product features 33/45/78 RPM selectable turntable Automatic / manual stop turntable Belt driven system Bluetooth connection for music playback Direct USB/SD encoding for turntable, FM radio & AUX IN Aux in for connection of other device (eg. CD & MP3 player) USB/SD slot for MP3 playback PLL radio with preset AM &...
-
Page 4: Installation
22) AUX IN JACK 23) ALBUM/PRESET UP & DOWN 24) DUST COVER 25) RCA LINE-OUT JACK 26) RCA LINE-OUT JACK 27) EXTERNAL POWER ADAPTOR JACK 28) FM ANTENNA 29) 45RPM ADAPTOR 30) LIFT LEVER 31) AUTO STOP ON/OFF SWITCH 32) 33/45/78 RPM SELECTOR 33) TONE-ARM Caution Usage of controls or adjustments or performance of procedures other than those specified herein may result in... - Page 5 LCD display lights up, it means the power supply is normal, now your system is ready for use. Setting the clock When the STANDBY INDICATOR light up, unit is in the standby mode. During standby mode, select between 12H or 24H mode: press MODE button, 12H / 24H will be flashing. Press SKIP or SKIP button to select 12H / 24H mode.
- Page 6 Rotate PRESET UP & DOWN knob continuously to select desired station Note: maximum storage: 30 stations for FM, 20 stations for AM. FM & FM-stereo reception Press FM ST. button on the remote control to select FM mono or FM stereo mode. When stereo signal is weak. It is preferable to receive the program in mono.
- Page 7 Do not take out USB or SD device during recording to USB/SD. Phono & Encoding Note Remove the stylus protector. Be sure that the tone arm is being detached from the tone arm rest before operating and re-secured again afterwards. Press FUNCTION button to select “PHON”...
- Page 8 to work. To hear newly encoded track: Press FUNCTION button to select USB or SD mode. During playback from USB or SD, press REC button to switch between tracks recorded by this unit or other tracks stored in the USB (or SD) originally. Rotate ALBUM UP & DOWN knob, if LCD shows “F000”, it means the unit has been switched to the folder for storage of tracks recorded by this unit.
- Page 9 Remark The recording speed is 1:1 and according to the actual playing time of the external audio device. The recording format is preset at – MP3 bit rate : 128 kbps Do not take out USB or SD device during recording to USB/SD. Playback of MP3/WMA song via USB storage media or memory card The system is able to decode and playback all MP3 / WMA file which stored in the memory media with USB connecting port or SD/MMC memory card.
-
Page 10: Bluetooth Connection
format, some MP3 trucks may not be able to play via the USB and SD socket. This is not a malfunction of the system. There are numerous USB and SD device producers. Solution and format are variable between each other. Therefore, we do not guarantee this unit can support all USB and SD device from every brand. - Page 11 To finish encoding, press STOP button, “REC” will disappear. To divide track, press REC button during recording, recording will stop momentary. Then recording will resume to work. To hear newly encoded track: Press FUNCTION button to select USB or SD mode. During playback from USB or SD, press REC button to switch between tracks recorded by this unit or other tracks stored in the USB (or SD) originally.
-
Page 12: Battery Installation
Remote control Battery installation The infra-red transmitter requires 1 pc CR2025 lithium battery for operation Button description STANDBY: Trigger between standby mode and operation mode. PRESET / ALBUM DN: Perform same function as ALBUM DOWN / PRESET DOWN button on the unit.