Advertisement
format, some MP3 trucks may not be able to play via the USB and SD socket. This is not a malfunction of the
system.
-
There are numerous USB and SD device producers. Solution and format are variable between each other.
Therefore, we do not guarantee this unit can support all USB and SD device from every brand.
-
SD card can be supported up to 8GB.
Removing of USB / memory card
To remove the USB / memory card, turn off the power or switch the function mode to other mode (turntable, aux or
radio) first, then un-plug the USB/SD device by pulling out from the socket directly.
File delete from USB / SD card
The system is able to erase the file stored inside the USB drive or SD card:
1.
Press and hold DEL button for 3-5 seconds during the playback of the desired track.
2.
"DEL" will be shown on the display.
3.
"DEL" will disappear on the display, it means the track is deleted.
Bluetooth connection
Press FUNCTION button to select "BT" on LCD, then the unit is ready for connection with your Bluetooth
1.
device (such as mobile phone).
2.
Switch on the Bluetooth function of your Bluetooth device, and select "M301RC" Bluetooth equipment for
connection.
3.
After your Bluetooth device is connected with the unit via Bluetooth, start to playback from your device.
4.
Press the BT-PLAY/PAUSE button once to halt playing, press it again to continue.
5.
During Bluetooth playback, press BT-NEXT button once to play the next file.
During Bluetooth playback, press BT-PREV button once to play the previous file.
6.
7.
Since there are too many format of playback application for Bluetooth device (such as mobile phone), format
of each other is different, this unit may not be able to support every Bluetooth device. This is not the
malfunction of the unit, please try another Bluetooth device again.
Bluetooth encoding
1.
Press FUNCTION button to select Bluetooth mode.
2.
Insert memory device (USB drive, SD or MMC card)
Press the REC button, then USB or SD icon will be flashing.
3.
Press SKIP
or SKIP
4.
button again to confirm. And the system is starting the encoding mode after few seconds.
5.
If only USB drive, SD or MMC card is inserted, step 4 can be skipped.
6.
The "REC" will be flashing on the display during encoding.
button to select desired mode (USB or SD) for encoding. Then press the REC
-
-
9
Advertisement
