Download Print this page

SONIQ QPLAY QPC60B Instruction Manual

Download this manual

Enlarged version

Overview of The Player

Dripping Warning: The product shall not be exposed to dripping or splashing

and no items filled with liquid like a filled glass or vase or cup, shall be placed on

the product.

Ventilation Warning: The ventilation openings of the product shall not be

intentionally covered.

The mains plug is used as disconnect device, the disconnect device shall

remain readily operable.

4 5 6 7 8 9 10

16 17 18

19 20

21 22

Page 1 Overview of The Player Dripping Warning: The product shall not be exposed to dripping or splashing and no items filled with liquid like a filled glass or vase or cup, shall be placed on the product. Ventilation Warning: The ventilation openings of the product shall not be intentionally covered.
Page 2: Power Supply
LOCATION OF CONTROLS 14. TUNING CONTROL 12. This shows when player reads data from SD/MMC card. 1. VOLUME CONTROL 15. SPEAKERS 13. This figure is the album number of the disc played. 2. SKIP DOWN BUTTON 16. USB PORT 14. This figure is track number of the current album on a MP3 disc or the current 3.
Page 3 NOTES: PLAY A DISC If a particular FM (STEREO) station is weak, or you hear too much 1. Slide the Function switch to CD/MP3/AUX position. background noise, try moving the band selector switch to the FM (MONO) 2. Follow the steps above to load a disc. position.
Page 4: Programmed Play
RANDOM PLAY 4. Hold the SKIP UP button in music play to search at quick rate for a specific Random play is that tracks on the disc are played by the player at random. point to play. Press MODE button four times to enter this mode during play, "RANDOM" 5.
Page 5 PROGRAMMED PLAY Press and hold SKIP buttons to initiate high-rate scanning between tracks; Programmed play is that tracks on the disc can be edited for playback in a release one of them to begin playback of music at normal speed. preferred order with the use of PROG.