Installation; Installation Warning; Mounting To Pump Discharge Pipe - Level Sense Pro User Manual

2.0 Installation

Level Sense Pro is designed for indoor installation only. The ideal
mounting location is in the utility room within a few feet of the
sump pump pit. Consideration should be taken to keep within
range of the homes Wi-Fi router. Wi-Fi range varies based on the
router and environmental conditions. We recommend range
testing before installation. If the device is out of range, consider
a Wi-Fi range extender. The Level Sense Pro can be mounted
2.1

Installation Warning

Working around water and electricity is inherently dangerous.
Disconnect all electrical circuit breakers near the sump pump and
installation area before beginning work. If you are unfamiliar or
uncomfortable please contact a licensed electrician to perform the
installation.
2.2

Mounting to Pump Discharge Pipe

For most customers, mounting to the discharge pipe of the
sump pump, or other nearby PVC pipe, is the simplest installation
location. First, install the two self-adhesive mounting squares to
the back of the device as shown below. Then, feed a zip tie through
the mounting square opening and around the pipe and zip tight.
Repeat for the second mounting square. Install the device
For larger diameter pipes, connect a second zip tie in series to extend
TIP:
the length of the zip tie.
4