Cisco UCS 5100 Configuration Manual page 3
Uplink ethernet connection
Hide thumbs
Also See for UCS 5100:
- Setup (17 pages) ,
- Firmware manual (10 pages) ,
- Upgrade instructions (10 pages)
Advertisement
The ports to be configured as Uplink Ethernet Ports are removed from the Unconfigured Ports folder
and added to the Uplink Ethernet Ports folder.
7.
As shown, an Uplink Ethernet Port is successfully configured. Click OK.
8.
Make sure the new Uplink Ethernet Port is physically connected to your upstream LAN switch and
the proper VLANs are configured.
Advertisement
