Receiving And Storage - Ametek 270SF Instruction Manual

Receiving and Storage

The UAI 270SF Extractive Gas Sample Probe is a complete pre-installed unit. No assembly is necessary when received
on-site.
Carefully inspect the product and any special accessories included with it immediately on arrival by removing them from
the packing and checking for missing articles against the packing list.
Check the items for any damage in transit and, if required, inform the shipping insurance company immediately of any
damage found.
Storage Location should be protected from the elements. Although all components provided are designed to resist
corrosion, additional protection from heat (>140°F/ 60°C) and humidity is recommended.
Page 3 of 45
MAN.270SF.REVA.12222014