Attaching The Supplied Wide Conversion Lens - Sony DVCAM DSR-PD100AP Operating Instructions Manual

Attaching the supplied wide conversion lens

Hold the camcorder with its lens pointing upward. Align the groove on the wide conversion
lens with the protruding part on the camcorder lens, then turn the ring in the direction of the
arrow.
Attaching the wide conversion lens hood
Align the protruding part on the wide conversion lens hood with the groove on the wide
conversion lens, then turn the ring in the direction of the arrow.
Note on the wide conversion lens
When the wide conversion lens is attached to the camcorder, the Steady Shot function may
not be fully effective.
To attach the wide conversion lens securely
Turn the ring of the lens while lightly pressing the wide conversion lens down on the
camcorder.
Note on the wide conversion lens hood
When the hood is attached to the wide conversion lens, you cannot attach a filter, etc. If you
need to use a filter, detach the hood before attaching the filter.
Note on the video flash light
When you use the HVL-FDH2 video flash light (not supplied) with the supplied wide
conversion lens attached, the flash light will be partially eclipsed by the lens.
64