To Focus The Viewfinder Lens - Sony DVCAM DSR-PD100AP Operating Instructions Manual

Camera recording

To focus the viewfinder lens

If you cannot see the indicators in the viewfinder clearly, or after someone else has used the
camcorder, focus the viewfinder lens. Move the viewfinder lens adjustment lever so that the
indicators in the viewfinder come into sharp focus.
Note on Standby mode
If you leave the camcorder in Standby mode for 5 minutes while the cassette is inserted, the
camcorder turns off automatically. This prevents wearing down the battery and wearing out
the tape. To resume Standby mode, while pressing the small green button on the POWER
switch, set it to OFF once, and then to CAMERA. To start recording, press START/STOP.
Note on the progressive mode
If you modify the images on your personal computer or play the images back as still
pictures, we recommend you to set PROG. SCAN to ON in the menu system before
shooting. The picture quality may improve in this mode, but if you shoot a moving subject,
the image may shake when it is played back.
Note on the lock knob
When you set the lock knob to the left position, the POWER switch will not be set to
MEMORY accidentally.
Notes on the time code
•The time code indicates the recording or playback time, "0:00:00" (hours : minutes :
seconds) in CAMERA mode and "0:00:00:00" (hours : minutes : seconds : frames) in VTR
mode.
•Be sure not to make a blank portion when recording, because the time code will start from
"0:00:00:00" again.
•You can select the drop frame or non-drop frame system using the menu. (DSR-PD100A
only)
•You can reset the time code to "0:00:00" in the CAMERA mode or to "0:00:00:00" in the
VTR mode. Press the TC RESET button in the Recording or Recording pause mode.
Note on the tape recorded in the DV format
If you record in the DVCAM format on the tape that has been recorded in the DV format, the
playback picture and sound may be distorted between the two formats.
Note on the beep sound
Note that the beep sound is not recorded on the tape. If you do not want to hear the beep
sound, select OFF in the menu system.
Note on remaining tape indicator
The indicator may not be displayed accurately depending on the tape. Though the indicator
does not appear at the time of recording, it will appear in a few seconds.
14
Lock knob