Setup Files; Calling Up A Setup File - Sony DSR-390L, DSR-390PL Operating Instructions Manual

Setup Files

You can use setup files to reproduce a particular
configuration of settings. You can also revise the
contents of setup files.
There are eight types of setup files, of which five are
factory preset setup files and the other three are user
files.

Calling up a Setup File

This describes how to call up a setup file and use it to
replace the current menu settings.
1
Set the SETUP switch to FILE.
The camcorder is set according to the currently-
selected file data.
2
Access basic menu page 3.
a) An asterisk (*) appears in front of any factory preset
file whose contents have been revised at least once.
108
Chapter 4 Viewfinder Screen Indications and Menus
3
Move the cursor to SELECT FILE with the MENU
switch and use the MENU dial to select the desired
file.
File
STD
HISAT
FL
FILMLIKE
SVHS/VHS
SETUP switch
USER1 to USER3
4
Move the cursor to CHG FILE and press the
MENU dial.
The display changes as shown below and the
selected file is called up.
a)
Current file
Selected file
You can also call up these files via a similar operation
in advanced menu page 10 (page 9 on the DSR-390/
390P). In this page, a file recorded onto a tape can
also be called up.
For details, see "To call up files recorded onto a tape "
(page 109).
Description
Settings for shooting under
standard conditions
Settings for making pictures
vivid
Settings for shooting under
fluorescent lighting
Settings for making pictures
like ones shot by film camera
This mode is more effective
when used with DCC OFF and
DL-OFF.
Settings to optimize camera
image for recording and
playback characteristics of S-
VHS, VHS, or Hi-8 tape
User setup files (set to STD at
shipping)