Table of Contents
Advertisement
Prepare the dispenser.
Attention! The location of the hole in the dispenser top is dependent
on the type of dispenser. Be sure to follow Step 3.1 for the
appropriate dispenser.
3.1
Hole location - Harmony (Lancer, Cornelius or Servend), or 110CM Symphony Plus
Lancer Sensation and Touchpoint
Back of Top
3.0" ∅
Front of Top
Locate hole position 9" (254 mm) from
back and 9" (229 mm) from right of
dispenser top
3.2
Top preparation
• Remove protective tape from gaskets
6
Standard (Cornelius, Lancer, or Servend)
9.00"
10.00"
Locate hole position 5" (127 mm) from back
of dispenser top
HARMONY and Symphony Plus • RIDE Technology
self-contained
Dispenser preparation
110CM Symphony Plus
5"
(127 mm)
3.0" ∅
(77,2 mm)
Locate hole position 5" (127 mm) from
back and right of dispenser top
3.3
Top preparation
• Apply gaskets
• Install shuttle actuator
dispenser top and secure with locking nut
➌
5" (127 mm)
Back of Top
5"
(127 mm)
3.0" ∅
(77,2 mm)
Front of Top
—
–
˜
–
➊
➋
through
3
Advertisement
Table of Contents
