Sennheiser MKH 8060 Instruction Manual

Hide thumbs Also See for MKH 8060:

Advertisement

MKH 8060
Bedienungsanleitung
Instruction manual
Notice d'emploi
Istruzioni per l'uso
Instrucciones de manejo
Manual de instruções
Gebruiksaanwijzing
Инструкция по эксплуатации
使用说明书

Advertisement

Table of Contents
loading

Summary of Contents for Sennheiser MKH 8060

  • Page 1 MKH 8060 Bedienungsanleitung Instruction manual Notice d‘emploi Istruzioni per l‘uso Instrucciones de manejo Manual de instruções Gebruiksaanwijzing Инструкция по эксплуатации 使用说明书...
  • Page 2: Important Safety Instructions

    It is considered improper use when the product is used for any application not named in the corresponding instruction manual. Sennheiser does not accept liability for damage arising from improper use or misuse of this product and its attachments/accessories. Before putting the products into operation, please observe the respective...
  • Page 3: Delivery Includes

    Delivery includes Delivery includes • Microphone, consisting of the MKH 8060 microphone head and the MZX   8 000 XLR module • MZQ 8060 microphone clamp • MZW 8060 foam windshield • Instruction manual • Frequency response sheet • Threaded transport tube...
  • Page 4: Putting The Mkh 8060 Into Operation

    48 V ± 4 V phantom powering (P48, as per IEC 61938) • XLR-3 connector, balanced To connect the MKH 8060 to a mixing console or recording device: Connect the socket of the microphone cable to the microphone. Connect the connector of the microphone cable to the mixing console or recording device.
  • Page 5: Using The Windshield

    Alternative windshields are available as accessories and can be found on the MKH 8060 product page at www.sennheiser.com. Using optional modules You can retrofit and extend the microphones of the modular MKH 8000 micro- phone series by using optional modules.
  • Page 6: The Mzd 8000 Digital Module

    If necessary, disconnect a connected XLR cable in order to not distort the cable and to avoid short-circuits. Unscrew the microphone head from the XLR module 3. Screw the MZD 8000 digital module to the microphone head. MKH 8060 | 17...
  • Page 7: Transporting The Microphone

    Liquids entering the product can short-circuit the electronics or damage the mechanics. Solvents or cleansing agents can damage the surface of the prod- uct. Keep all liquids away from the product. Only use a soft, slightly damp cloth to clean the product. 18 | MKH 8060...
  • Page 8: Specifications

    -10 °C to +60 °C Polar pattern 0° 30° 30° 60° 60° 90° 90° 120° 120° 125 Hz 2,000 Hz 150° 250 Hz 150° 4,000 Hz 180° 500 Hz 8,000 Hz 1,000 Hz 16,000 Hz Frequency response MKH 8060 | 19...
  • Page 9: Manufacturer Declarations

    Manufacturer declarations 90° 0° Manufacturer declarations Warranty Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on these products. For the current warranty conditions, please visit our website at www.sennheiser.com or contact your Sennheiser partner. FOR AUSTRALIA ONLY Sennheiser goods come with guarantees that cannot be excluded under the Australian Consumer Law.
  • Page 10: Statements Regarding The Fcc And Industry Canada Rules

    Manufacturer declarations claim. The Sennheiser International Warranty is provided by Sennheiser Australia Pty Ltd (ABN 68 165 388 312), Unit 3, 31 Gibbes Street Chatswood NSW 2067 Australia. In compliance with the following requirements • WEEE Directive (2012/19/EU) Notes on disposal...
  • Page 11 Compliance Compliance Europe EN 55032 EN 55035 FCC 47 CFR 15 subpart B Canada Industry Canada ICES_003 China Australia/New Zealand MKH 8060 | 93...
  • Page 12 Sennheiser electronic GmbH & Co. KG Am Labor 1, 30900 Wedemark, Germany, www.sennheiser.com Printed in Germany, Publ. 12/18, 581394/A01...

Table of Contents