Installing The Camera - Dell Precision 3540 Service Manual

5 Remove the display assembly
6 Remove the display bezel.
7 Remove the hinge caps.
8 Remove the display hinges.
9 Remove the display panel.
Steps
1 Peel the two conductive tape that secures the camera in place [1].
2 Using a plastic scribe carefully pry and lift the camera module from the display back cover [2].
3 Disconnect the camera cable from the connector on the camera module [3].

Installing the camera

Steps
1 Connect the camera cable to the connector on the camera module [1].
2 Insert the camera into the slot on the display back cover [2].
3 Affix the two conductive tape above the camera [3].
106 Disassembly and reassembly