Table of Contents
Advertisement
Components Used
The information in this document is based on these software and hardware versions:
•
Cisco UCS B440−M1 Blade Server
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
Refer to Cisco Technical Tips Conventions for more information on document conventions.
Background Information
Cisco UCSM allows you to define the B440−M1 10Gb mezzanine adapters, of which there are now four:
•
QLogic Schultz based CNA (M72KR−Q)
•
Emulex Tigershark based CNA (M72KR−E)
•
Intel Niantic based NIC (M61KR−I)
•
Broadcom Everest based NIC (M51KR−I)
The B440−M1 10Gb mezzanine adapters used for this document are Emulex−based CNA M72KR−E that
supports two vHBAs/vNICs.
This is an example of a 2−slot (1 and 2) Interface Adapter with 2 HBAs and 2 NICs per Virtual Interface
Adapter:
Advertisement
Table of Contents
