Cisco UCS 5100 Upgrade Instructions page 7
Server blade
Hide thumbs
Also See for UCS 5100:
- Setup (17 pages) ,
- Firmware manual (10 pages) ,
- Quick start manual (8 pages)
Advertisement
4.
Associate the Service Profile with a server blade or server pool:
After the Host Firmware Package policy is assigned and saved, associate this policy to the Service
Profile used by the blade server and, monitor the KVM output to see the new BIOS get displayed. The
BIOS upgrade should not extend the blade's boot time.
a.
Click the General tab.
b.
Click Change Service Profile Association.
Advertisement
